Your cart is empty.
Your cart is empty.Product Description
Specifications:
- Type: DC5V,0-15min/DC5V,0-60min/DC12V,0-15min/DC12V,0-60min/DC24V,0-15min/DC24V,0-60min (Optional)
- Max. Load Capacity: 10A250VAC, 10A30VDC
- Size: 70x20mm / 2.75x0.78"
- Time Error: <2%
- Package Includes:1 x Timer Relay Module
Performance:
- When jumper OP1: 1s to 100s, the adjustment accuracy is 0.1s.
- When jumper 0p2: 1s to 15min, accuracy 1s.
- The delay error is less than 2% under various temperature and humidity.
T1(the relay turn on delay time), T2(the relay turn off delay time)
Once Mode(Jumper OP3):
- 1. The module Power-on, When triggered the relay is switched on, delay T1, and the relay disconnected.
- 2. When triggered on the delay process, again triggered, it will immediately interrupt the delay.
Cycle Mode(Jumper OP4):
- 1. The module Power-on, When triggered the relay is switched on, delay T1,and the relay is disconnected, delay T2, the relay is switched on again. Such cycle. T1 and T2 are set by two adjustable resistors, respectively.
- 2. When triggered on the delay process, again triggered, it will immediately interrupt the delay.
How to Set Time Quickly:
- Time can be quickly set by measuring voltage(Uc) of resistor. Take a 5V 15min module as example. If Uc=2V, time=2V/5V*15min=6min.
- Special note: trigger button is not necessary. If you need to power up, start the cycle instead of pressing the button. Then, please short the trigger wire of the connect button directly.
Adjustable "on" time and "off" time:
- It is a timer relay module with high precision, stable and reliable performance.
- Support 2 modes, mon mode(once) and cycle mode, and you can simply switch mode by adjusting the jumper.
- There are many voltage and time range for your choice, both "on" time and "off" time are adjustable.
- It is great to control the reciprocating stroke, or repetitive power on and off for equipment and products burn-in test.
- Widely used on timer operating equipment, machine repetitive test circuit, fish tank intermittent pump, etc.
Typical application reference:
- Time limited working equipment, such as automatic power-off after 5 minutes of triggering each key.
- The machine repeats the test circuit, such as power on for 1 minute and power off for 1 minute.
jorge b.
Reviewed in the United States on September 20, 2024
Este con un sensor de flujo de agua para bomba de agua es la combinación perfecta
SAMUEL YUNEZ
Reviewed in the United States on August 9, 2024
This item doesn't work, unable to install it properly
Mark the Mechanic
Reviewed in the United States on February 3, 2024
Nice inexpensive simple timer works just as the listing says.Turning the pots fully clockwise gives the shortest time intervals.The on/off requires a momentary contact to activate. Note that once a time cycle is activated, activating again overrides the timer and switches the relay immediately to its alternative state.
juddyherdman
Reviewed in the United States on February 1, 2024
i LOVED THIS THING WHILE IT WORKED.. its better quality, but almost too much option for adjustment.. I shoulda tonned down my man handling with it, and maybe ben more gentle?idk, But it was somewhat doing what i wanted, then i moved it and somehow a wire pulled out of my breadboard, and musta shorted it out. Now its junk..parts.. ill use it as jsut a relay i guess..SOME FAULT/SHORT PROTECTION WOULD BE NICE ON ALL THESE LILL GADGETS..Still, this is the better one out of the many i have tryed..
Justin
Reviewed in the United States on December 22, 2024
The media could not be loaded.
Customer
Reviewed in the United States on January 22, 2024
Delay adjustments have no effect at all on either Delay-On or Delay-Off. Comes on immediately, and stays on until power is removed. Nothing more than a straight relay with some useless other components to make it look good.Useless.No instructions, directions or support in English.Stay far-far away from this rip-off.
skiddy
Reviewed in the United States on September 28, 2023
This is working perfectly in my application which was to delay the power up of a connected device. Well, almost perfectly. The device does get power for a fraction of a section then powers off until the delay timer counts down. Then it powers up and stays up (I have it set to a one time delay(i.e. not a cycle). The documentation fails to mention that the three load connections are to allow for a normally closed circuit or a normally open circuit. On the three load connections, the middle connection is the common connection (I have it connected to power +). On either side of the middle connection, one is connected to common during the delay time while the other is disconnected from the common during the delay time. When the delay time expires, the connections are reversed (the connected one becomes disconnected and the disconnected one becomes connected). I've only had the unit for a day but thought this might be helpful to others.
Jerome Pavlick
Reviewed in the United States on July 7, 2023
This works exactly as expected. The only improvement is a better written explanation of its operation.
Jean Jacques
Reviewed in Canada on December 26, 2022
Les spécifications,ne correspondent pas a la grosseur des fils de raccordement,tres tres petits
Recommended Products