Your cart is empty.
Your cart is empty.Product Description
385311462 385310677 RV Toilet Seal Kit
Perfect Fit Models：
- 110,111,210,510,510H, 511,711-M28
- 711-98C,712-TM09,848,910,911,2011
VacuFlush:
- VacuFlush 168, VacuFlush 606, VacuFlush 647
- VacuFlush 648, VacuFlush 1006, VacuFlush 1008, VacuFlush 1047
- VacuFlush 1048, Vacuflush 1049, VacuFlush 1106, VacuFlush 5146
- VauFlush 5148, VacuFlush 5149
Supported Models Partial Listed
Dome-tic / Sealand:
- 506+, 511H, 547+, 548+, 706, 709, 748, 749
- 806, 808, 847, 848, 1147, 1148, 2010, 2011, 5006, 5047, 5048, 5049
- EcoVac 146-149
- DOES NOT REPLACE SEAL ON: 300, 310, 320 series Dome-tic toilets
Easy to Install
- Turn off the water switch.Press the flush pedal to drain water from the toilet
- Remove base cover
- Lose the stainless steel strip and remove the plastic half clamp to connect the porcelain and plastic base
- Tilt the porcelain bowl forward, grab the vacuum breaker attached to the back of the toilet, and pull it out of the toilet. Put the toilet aside
- Remove original kit.Check flush balls for gaps, scratches or mineral deposits. Cleaning or replacement as necessary
- Place the large plastic disc on the top of the thin seal, through a ring of thin seal raised in the center of the large disc.
- Place seal and disk assembly on top of flush ball
- Place the porcelain back on the toilet base, align the notch with the pin on the base, and align the bowl outlet with the flush ball. Then insert the vacuum breaker into the back toilet and push it into the rubber seal ring
- Reinstall plastic half clip under loose steel strip, tighten stainless steel clamp
- Reinstall pedestal cover, turn on water
John McCaherty
Reviewed in the United States on September 13, 2024
Easy to replace, fit tight and arrived on time…. Great seal problem solved.
Informative
Reviewed in the United States on August 29, 2024
Works perfect, saved a bunch of money compared to what they charge at the local camper store.
James B
Reviewed in the United States on June 16, 2024
Great replacement for the old style. Reduces the possibility of leakage with the new design
Pane enda hass
Reviewed in the United States on February 6, 2024
Don’t spend $75 on a factory seal, this one works just as good. Put off fixing this and after an easy 20 min install I wish I would have done it a long time ago.
realpepperman
Reviewed in the United States on November 1, 2024
It was easy to install but trying to get the bowl aligned was hard but I did get it to fit.
Wheeler
Reviewed in the United States on April 24, 2024
Replaces the bowl seal in most Dometic toilet models even though it doesn't look exactly like the original. Watch the Youtube videos for instructions on various models to figure out which model you have, take your time and install is easy
Dave Tranchina
Reviewed in the United States on September 19, 2023
good item
D. Williams
Reviewed in the United States on August 24, 2022
Can I even return this? Will they accept it after it’s been placed on my toilet?! I doubt it. Looks like I’ll hate to take my loss. Does not fit the Dometic 210. Hole in rubber gasket is too small. Raised center portion of rubber gasket is too big in diameter. Plastic plate is too big for toilet. Cleaned my old gasket and put some plumbers grease on it. Bowl leaks worse than before. Looks like OEM is going to be the only route. Don’t buy this and waste your time. It doesn’t fit.
Recommended Products