Red Oak Thin Wood Veneer Sheets (Figured Grain) - 7.5 Inch Wide x 98 Inch Long, thickness of 0.25mm (10mils),Natural Wood for Furniture, Cabinets, and DIY Crafts
Elevate your woodworking projects with our Red Oak Thin Wood Veneer Sheets, featuring beautiful figured grain patterns. Each sheet measures approximately 7.5 inches wide and 98 inches long, providing ample material for a variety of applications, from furniture making to cabinet refinishing and DIY crafts. The veneer has a thickness of 0.25 mm, making it both flexible and durable.
Because this is a natural wood product, the grain patterns and colors will vary from batch to batch, ensuring that each piece is unique. The dimensions provided are approximate and may have slight variations due to the natural characteristics of the wood. Additionally, the veneer is backed with non-woven fabric, enhancing its durability and ease of application.
Natural wood features such as small knots, burls, and minor imperfections (e.g., small holes) are normal and are part of the veneer’s authentic beauty. These characteristics highlight the genuine nature of the wood, making your projects truly one-of-a-kind.
Usage Instructions

1. Prepare the Surface:
   • Ensure the surface to which you will apply the veneer is clean, dry, and smooth. Remove all dust, grease, and loose materials.
2. Cut the Veneer:
   • Use a sharp blade or scissors to cut the veneer to the desired size. It’s recommended to cut slightly larger than the actual size needed, allowing for easier trimming later.
3. Apply Adhesive:
   • Evenly apply a suitable adhesive (such as wood glue or contact cement) to both the back of the veneer and the target surface. Follow the adhesive manufacturer's instructions for best results.
4. Apply the Veneer:
   • Carefully place the veneer onto the target surface, starting from one end and gradually smoothing it out to avoid bubbles and wrinkles.
5. Secure and Fix:
   • Use an iron set to a low to medium temperature (without steam) to evenly apply pressure from the center outward, ensuring the veneer adheres firmly. The heat from the iron will activate the adhesive and help bond the veneer to the surface. For larger areas, place a cloth over the veneer to protect the surface while applying heat.
6. Trim the Edges:
   • Once the adhesive has dried, use a sharp blade or sandpaper to trim any excess veneer, ensuring the edges are smooth and neat.
7. Protect and Finish:
   • Optionally, apply a layer of clear varnish or wood wax to protect the veneer and enhance its appearance.
Additional Information

• Natural Characteristics: Because this is a natural wood product, each veneer sheet's pattern, color, and texture will vary. These variations, along with natural features like small knots, burls, and minor imperfections (such as small holes), are typical and add to the wood’s unique charm.
• Size Variations: The stated size of 7.8 inches by 98 inches is approximate; actual product dimensions may have slight variations.
• Thickness: The product thickness is 0.25 mm, ensuring it is strong yet flexible and easy to handle.