Your cart is empty.
Your cart is empty.Product Description
Securely Mount Accessories Without Screws or Adhesives
- Patent-pending anchors expand to lock into place behind the screen and contract to remove with nothing left behind
- Compatible with industry-standard 17mm mounts, arms, and other accessories
- Anchors are Made in California with 3D-printed, high-temperature, PolyHex plastic
Mount on Either Side of the Screen
Mount the arm anchor on the driver's side or non-arm anchor on either side of the center screen
Easy Installation and Removal
Step 1
Position the anchor by the screen with your index finger behind it.
The next steps will position the hooks marked 1 and 3 with the corresponding slots behind the screen.
Step 2
Slide the anchor behind the screen until the 1 hook is in the 1 slot.
Step 3
Move your finger over the end of the anchor to press the 3 hook into the 3 slot.
The anchor should tilt towards the dash and click into place.
Step 4
Tighten the screw to expand the anchor and secure the hooks in place.
To remove, loosen the screw 8 half-turns and tilt the anchor towards the screen.
17mm Accessories Installation
Step 1
Loosen and remove the nut on the phone mount socket.
Step 2
Place the nut over the ball mount.
Step 3
Place the phone mount socket on the ball mount.
Important! Align the nut straight to prevent cross threading.
Step 4
With the phone mount positioned as desired, tighten the nut to secure it.
Note: If the nut will not tighten, double-check that it is not cross-threaded in Step 3!