Your cart is empty.
Your cart is empty.Product Description
Multiple Control Modes
Two Installation Methods to Choose
Installation Height and Luminous Range
Suitable for various outdoor areas
Customer
Reviewed in the United States on February 23, 2025
Not bright at all
Customer
Reviewed in the United States on January 6, 2025
One works great other one randomly turns off after being on for 10-15 minutes. Both were charged in Sun for full 2 days and placed under plenty of sun. Will be returning
M.Hart
Reviewed in the United States on January 23, 2025
Very good price but it wasn't bright enough for where I was going to put it.
kelly d
Reviewed in the United States on September 5, 2024
This is a 2 pack of solar lights that have plastic arms for mounting and each comes with a remote control for you to control your settings. they are not heavy duty but they do produce enough light at night to illuminate my walkway to our boat dock. As far as durability I will have to update later and see how they last.
Monkeybutt
Reviewed in the United States on September 25, 2024
I needed a few solar lights to put up in the trees out near my entrance to my property that I am uanble to see from the home and is very dark at night. I used both to mount up about 30ft up and about 40 feet from the road but pointed towards the center entrance so they were angled outward.On a cloudy day these things light up most of the night, I have checked on them aroun 3am and they were still lit. Not sure of battery power but they do work really well.
gusp201
Reviewed in the United States on August 28, 2024
This is a review of Jercoda 800W Solar Street Lights, in a 2 Pack, with 2 Remote Controls. The model number is 22074M2. The ASIN (Amazon Standard Identification Number) is B0D9MJFWCW.Each unit has 392 super bright 5730 SMD LED Chips with 800 watts of power and generates a very bright 80,000 lumens. AI describes 5730 SMD as high power, high brightness, low energy consumption, long life, and good light-color consistency.There is no wiring and no electric bill. Remove the protective film from the lenses before installation. The unit must be mounted in direct sunlight in order to charge the internal battery. Installation on a wall is easy, only requiring 2 screws for the mounting bracket, plus a screw connecting the bracket to the lamp head. Pole installation is a little more involved, but all necessary hardware is included. The recommended installation height is between 6-10 feet. At that height, the lamp can spread the light over a 220° area.Before mounting the assembly out of reach, press the green power button. This will allow the remote control to operate the lighting modes:Off-Bright-Off. The light remains off unless motion is detected. The light will stay fully bright for 25 seconds after movement ceases.Dim-Bright-Dim. The light is set to remain at 30% brightness unless the sensor detects activity. The light will than go to 100% brightness and will stay that way for 25 seconds after motion stops.Constant On. The light stays at 100% brightness from dusk to dawn.Timers can be set for 3, 5, or 8 hours.The assembly can stay in place all year. It is rated IP65, meaning that it is waterproof as well as frost and heat resistant. The manufacturer offers 1 Year Product Protection.
Nan K
Reviewed in the United States on October 28, 2024
I liked that this lamp includes different use options and a remote control to switch between them.
ASP
Reviewed in the United States on October 14, 2024
Item: Jercoda Solar Street Lights Outdoor Waterproof, Motion Sensor Solar Lights with Remote Control, 2 PACKFirst, these are ultra bright lights, so don't look directly at them for more than a second. Second, make sure you charge them in full sun for 2 days before using. If the light is turning on, then press and hold the green button on the light for 2 seconds to turn the light off. Looking at my included photo, you get two of everything the photo since this is a two pack. I think I included both of the small screw bags in the photo so you only get those two bags. There is a hum from the lights, when fully on from motion sensor or always on.Ultimately, I really like how powerfully bright these lights are.I will update later if any leaks appear or if the batteries stop working. Batteries are integrated and not removable.ON/OFF: Press the green button for two seconds to turn the light on or off. When you want to connect the remote, turn on the light, then press the OFF button on the remote for it to blink once to make sure the remote works, and then press OFF again to turn the light off.SIZE: Dimensions of the full product is 14.75" x 5.75". The solar panel is 13" x 4". The LED portion on the opposite side is 9" x 4.5" .REMOTE: It's not exactly clear from the remote or the instructions how to use it, but it will make some sense. The remote feels like cheap plastic and feels unnecessary. All these buttons on the remote could have been made simpler and put on the device. But it does offer some convenience for people who want to constantly adjust the settings between having a dim light always on and only lights on for 25 seconds during motion detection. For me, I am only going to use this as a motion sensor light to make sure the light works during the entire night, especially during winters. The remote has multiple settings for 3hr, 5 hr, 8hr, dim light always on, or same hour settings for motion light only, but it's not clear. The center button the remote does motion sensor only for 12 hrs, which is what I will use.METAL PLATES: The included metal plates are very thin and with some force bend easily and even snap. Be careful with the plates.ARM: The base of the arm is angled, so determine if you want to solar light slightly angled upward or downward slightly for best sun exposure to the solar panel. The arm is plastic, and seems strong enough to last, but I will update if it doesn't survive the winter.MANUAL: There are several misspellings in the manual, but it does make sense, mostly.
Recommended Products