Your cart is empty.
Your cart is empty.Ibera Bicycle wall hanger is designed as a horizontal mounting wall hanger for a single bike to save floor space! Aluminum body with foam-padded ABS frame holders. Easy installation with mounting hardware included. Adjustable hanger's angle to 45 degrees. This Ibera bicycle wall hanger is the perfect solution to create an organized space for your bikes. Sturdy, Durable Construction The sturdy and durable construction made out of aluminum makes this hanger safe for bikes to hang on the wall. Non-scratch Frame Holders The double arm hanger has padded ABS arms to keep the bike secure and protects against paint damage. Length-adjustable beam The length of this hanger can adjust according to your bike handlebar width. Position Adjustable Frame holders The wall hanger's angle (45 degree) can adjust to keep your bike level. It can be adjusted to be wider ot narrower, or to raise or lower either end of bike. Bonus Attach Wheel Anchor Strap Bonus Velcro strap can prevent front wheel from sideways swing. IMPORTANT: Mount hanger on masonry or concrete wall with anchors. Do not mount hanger on plasterboard wall or dry wall unless there is a wood stud behind. If you have any questions about the installation, seek for professional help. Specifications: Weight Limit: 39. 7 lbs/18 kg weight Limit. Material: aluminum body and foam-padded ABS frame holders. Color: Black. Adjustment size: 45 degrees. Weight (without packaged box): 2. 3 lbs (36. 8 oz). weight (with packaged box): 2. 9 lbs (46. 4 oz).
Heidi
Reviewed in the United States on April 16, 2024
Excellent bike racks and very sturdy. The directions were somewhat confusing but once we had the right tools (we have concrete walls in the garage) it was pretty straightforward. Meant for most bikes and we almost we’rent sure the bike rack wouldn’t hold my step through frame but it did!! Our neighbors have purchased these for their bikes too!
Beno
Reviewed in Australia on October 7, 2022
A nice adaptable rack for a bike with non standard top tube and when you are lacking in space.
Brad Busch
Reviewed in the United States on April 8, 2021
I originally purchased a bike holder from a local store and found it bent as you placed the bike onto it. I decided to replace it with this one, as I was fearful it would continue to bend and drop the bike. This mount is substantially better and a solid bike holder. It doesn't flex or bend at all when you place the bike on it. It was very easy to install. I noticed several people used a piece of wood between studs to mount this. I mounted it into a single stud behind the drywall as the instructions show and it worked great. I like that you can adjust the mount out from the wall as well to allow the wheels to position flat horizontally. My previous holder pushed the handle bars against the wall causing the wheel to turn and stick out. I also really like how you can adjust the holding bars based on the bike setup. My bike doesn't have a straight bar, so I adjusted these to make it so the bike still positions on the wall straight. Again, my previous holder was just a straight bar holder and the bike was slanted on the wall. Great buy and good value - Highly Recommended.
Ng Chong Kiat
Reviewed in Singapore on August 3, 2020
Is adjustable so you can straighten the bike horizontally, is wall mount and simple. However if you want to use it for bike repair, this is not strong enough. If this is made of steel it will be stronger, if the bike is too heavy you might have problems holding it.
M. Butler
Reviewed in the United States on June 21, 2020
Great bike hanger. I opted to follow other's advice, and mount this to a 18" piece of wood, then mount it to two studs. I used 1/4" nuts and bolts to mount the hanger to the wood, then 2x 3" GRK fasteners to mount the wood to the studs in my garage.This worked perfectly. I'm sure this could hold my weight, which is more than enough to hold a ~25lbs bicycle on a 6" arm.Some bash this because this does not come with hardware to mount to drywall (only masonry or concrete, as it does state in the description). However, the description also has pictures that state that you can use this to put your bike in any room in your house. This is misleading for those of us that do not dwell in fallout shelters. Although I read the reviews, and knew going in that I would have to purchase additional hardware to use this correctly, I wish the description and marketing were more clear about this. For this, I am docking one star.Also, the velcro strap is rather a strip. No ring to loop around, making usage a bit more time consuming. The pictures show a strap with a plastic loop, which I did not receive. I won't dock a star for this, but I'm disappointed.The aluminum construction is fantastic, and the two pieces fit very well together, not much slop. The plastic parts are sturdy, and where your top tube rests is covered in soft material. No metal will touch the tube, so no scuffs to the paint on the bike.The two allen bolts used to attach the two tubes of the product are not easy to get in, almost as if the holes are not tapped. I didn't check before inserting them, so I can't confirm.Overall, I'm very pleased with this product. I'll be buying a few more to mount the rest of my bikes in the garage.
Viewfinder
Reviewed in the United States on July 23, 2018
I was surprised by the lack of options for a wall-mounted bike rack. I considered making my own as it would not have been too difficult but stumbled upon the Ibera Wall Hanger. If you are searching as well, search no more. This hanger is very well designed and provides adjustability that no fixed shaped mount can offer. As you know, no two bikes are designed the same, with the top tube angling differently for even bikes within the same manufacturer. The Ibera allows small incremental adjustments to both arms so that the bike sits horizontally and does not slide one direction or the other. The adjustable tube also allows you to move the bike closer or further away from the wall. The bracket arms are wide enough for any size or shape top tube and will not scratch the paint on your bike. Additionally, it comes with velcro straps to anchor the front wheel to the frame, a good idea if you have young kids prone to playing with, knocking into or throwing balls at your bike.As for the complaints in other posts about the width of the top two screw holes being wider than a wall stud, this is true, but there are three easy solutions. #1-Use the stud for the bottom screw and one of the top screws and use an anchor for the other top hole (this is what I did); #2-mount the bracket onto the flat 4" side of a 2x4 and then mount the 2x4 across two studs, or mount onto any piece of wood and screw that board vertically into your stud; or, #3-just use a drywall screw into the other top hole as the two screws into the stud are more than ample to hold the bike. (Note that I have a lightweight road bike, so use your own discretion on scenario #3.Overall, great value and I am totally happy with this purchase.
Wilburkins
Reviewed in the United Kingdom on August 16, 2016
I decided over the summer to finally organise my summerhouse which was actually more like a glorified shed/dumping ground. So I bought two of these wall hangers in order to store my 11.5kg road bike and now rarely used 16.1kg mountain bike.The road bike is only attached to one central baton in the middle of the wooden panel. It just fits but I have checked and it is not going anywhere. Very securely attached and also very quickly attached. The bike is now off the floor but it is very easy to get it in and out of the summerhouse. I used the bike to go to and from parkrun this weekend and it was simple to get it off the hanger and then put it back.The mountain bike, which has not had a look in since I got the road bike, is considerably heavier at 16.1kg but the hanger will support bikes up to 18kg. The hanger is attached to both the top support baton AND the middle support baton. Again, I have checked daily and it is not going anywhere. The bike is very securely attached and is up and out of the way freeing up floor space.Highly delighted with my purchase of these two wall hangers. As previously mentioned, they are easy to install. They were attached within about 10 minutes. The actual bit that the bike rests on is adjustable to both men's bikes and women's bikes. As you can see from the photos, the bikes are very securely in place. Fabulous bit of kit that looks stylish but is also extremely practical and useful.
Tyler Gagnebin
Reviewed in the United States on July 22, 2016
Holds my 30lbs full suspension bike on the wall with strength to spare. I mounted directly into a stud of course.Love it. We needed to make some room in our office area and figured mounting the bikes high up on the wall was a good solution. This is adjustable enough that you can squeeze every last inch of space from your wall/roof.Pro's - adjustable arms in/out and tilt allows the bike to hang exactly where you want it, and mostly level, even with the top tube angle of my F/S bike. Clean look. Just 3 small screw holes. Seems like a very sturdy build.Con's - the "hook" part of the arm that holds your bike is a combination of too narrow/too tall - it gives me some issues when sliding the wide top tube of my bike into these hooks. Likely a non-issue for 90% of bikes out there. My bike barely fits (2015 Norco Fluid 7.1)- also the adjustment mechanism for tilting the arms can sometimes get bumped when taking your bike off the hanger, causing the spring-loaded arm to follow you and get in your way as you try to lift the bike away from the hangar.
Fitanow
Reviewed in Canada on February 13, 2016
This a great mount for the wall. Adjustable arms that gently cradle your top tube to keep your bicycle level. The only inprovement I can think of is the size and hole spacing of the mounting plate. The top two holes are too wide for a standard wall stud (edge of a 2x4). I could only get one screw to "bite" well into the stud. If they elongate the top portion of the plate and place the two holes one on top of each other spaced, say, 2" apart, would secure the mount to a single stud more securely in my case.With all that said, I ended up changing the way I mounted it. I attached an aluminum plate to the mount and then attached it all to a piece of aluminum extrusion that was attached to two vertical wall studs. This gave me an added advantage of horizontally adjusting the position of my bicycle via the slot in the extrustion (see pics). My bicycle is approx. 19 lbs and I'm not concerned of not using the bottom hole of the mounting plate. Any heavier (25lbs+), I would use another piece if extusion below the first one and use the bottom mounting hole as well.It's an exremely well made mount of incredible value. Cheapest I found here at Amazon.
Ajay Kumar
Reviewed in India on October 29, 2015
Amazing product... Very convenient and strong
Recommended Products
