Your cart is empty.
Your cart is empty.Hayden's rugged heavy duty oil coolers can be used for many different cooling applications and feature brazed copper tubes with aluminum fin construction. It features copper header and tube construction. It comprises of inner-swirl turbulator in every tube for maximum cooling and efficiency. It also has vibration absorbing rubber blocks mounting. There is only a minimal pressure loss due to headered design.
Kindle Customer
Reviewed in the United States on March 5, 2020
This is a robust, well made cooler.I've fitted it to my air compressor as an after cooler and as can be shown in the photos gets limited air flow from the compressor pulley which has vane type spokes to promote air flow over the compressor.I'm finding that the compressed air from the cooler is at ambient or body heat which is going to drop a lot of moisture out and not cook any down stream filters, etc.I'm very happy with the setup and cooler.The only hiccup I had was the cooler was slightly damaged on delivery but easily fixed by a local repairer.AutoPartsWAY and Amazon could not have been more helpful offering to replace it or pay for repair. Excellent customer service!
Sundowneradn
Reviewed in the United States on May 28, 2019
Added this to the Allison Automattic transmission on my Steiger PTA310 because for some reason after a overhaul it ran too warm.This solved the issue.Quick delivery too!
Customer
Reviewed in the United States on September 20, 2018
I bought this for my 2001 ford expedition with the 4R100 transmission. This cooler gets the job done towing a 5000 lb (actual weight) travel trailer down the road at 70 mph in a 90 degree day. Totally worth the money. Highly recommended.
canoer79
Reviewed in the United States on July 18, 2018
Not being used for it's intended purpose exactly. Using as the heat exchanger for a fan forced compressed air aftercooler. It has performed flawlessly in this role. No noticeable drop in air pressure or CFM from my 2 stage 60 gallon Quincy. The build quality is good and the price and size was perfect. Even at 120 degrees input I get ambient temperature air coming out. Placed above the air compressor for good condensed water flow to the separator or tank and added benefit of my fans blow down on to the pump and motor of the compressor to help cool them as well.
Thomas
Reviewed in the United States on February 14, 2018
I installed this on my 2006 Chevrolet 2500 8.1l with allison transmission. It comes with two sets of mounting hardware so there is no need to order any. It sits a little low so i had to attach the driver side trans line first before attaching the cooler to the front end.
Ken
Reviewed in the United States on March 9, 2017
I am using this as an aftercooler for my Champion 7.5hp 175 psi air compressor. It works beautifully. Air goes in very hot and comes out nice and cool. Actually thinking about getting one for my truck now since it worked so well for air.
Dunk
Reviewed in the United States on March 4, 2016
Good quality high flow cooler. I have been using it as an air compressor aftercooler and it reduces temps over 200* without a fan, kust abodut ambient with a fan. Pulls tons of water out with an auto drain filter after it. Would have no problem using it as a trans or oil cooler too.
Nathaniel Vanden Berg
Reviewed in the United States on March 4, 2015
Good quality product, seems to work well in my loader for the transmission cooler. It is normally hot to touch on the inlet side and just warm to cool on the outlet side, so i know its doing a good job. Good buy for the money....
Recommended Products
$66.88
$ 32 .99 $32.99