Your cart is empty.
Your cart is empty.Product Description
Enttec ODE Mk3 70407 POE 2 Universe DMX / RDM Ethernet Controller
The ODE MK3 is a robust, reliable, installation-grade Ethernet to DMX converter engineered to connect DMX fixtures to your Ethernet network infrastructure. Now you can expand your lighting project to the next level. With two Universes of bi-directional eDMX to DMX conversion and Art-RDM support, the ODE MK3 is compatible with a wide range of devices and allows for fast deployment of your DMX system. Simply connect, configure, and take control! Additionally, this Ethernet to DMX/RDM gateway is packed with installer-friendly features for a speedy installation and configuration; all managed through a web UI – and contained in a compact, portable form factors
Main Features
- Two bi-directional female 5-pin DMX ports with optional RDM (E1.20) support.
- IEEE 802.3af PoE (Power over Ethernet) or DC 12-24V input.
- Support for Art-Net 4, sACN, and ESP to DMX conversion.
- Support for DMX -> Art-Net (Broadcast or Unicast) / DMX -> sACN (Multicast or Unicast).
- HTP/LTP merging support for up to 2 eDMX sources. (Network -> Physical DMX).
- Intuitive device configuration and updates through the inbuilt localhost web interface.
- 10/100 Mbps network speed.
- Current Port Buffer’ allows live DMX values to be viewed in the web UI.
- Configurable DMX output refresh rate.
Connectors:
- 1 EtherCon Port (RJ45)
- 2 Bi-directional DMX (Female XLR5)
- 1 Power Input (DC Jack)
Box Content:
- ODE MK3
- Ethernet Cable
- Power supply with AU/EU/UK/US adapters
- 70029 Adapter 3 Pin Female to 5 Pin Male Connector
Mike
Reviewed in the United States on March 23, 2025
Extremely happy with the ODE WIII! Previously used a USB DMX - the ODE allowed me to switch to ArtNet and it was so easy. Really just plug and play. While I had A/C close by, I love that PoE is an option. The unit is very light weight making installation simple.I am not a lighting professional I used this for highschool theatre where students run the tech. Adding the ODE has simplified the workflow and reduced the number of components we need to think about.
Dennis R.
Reviewed in the United States on June 30, 2023
I just want to let people know if you are having an issue with your lights dropping dmx signal every 120 seconds make sure you turn off RDM mode on on the DMX universe you are having the issue. I spent a few hours trying to debug my friends lighting system to track this down. Enttec mentions on page 5 of the Enttec ODE MK3 manual: “Enttec recommends disabling RDM if your fixtures do not require it. Some older fixtures that support the DMX 1990 Specification can behave erratically when RDM packets are on the DMX line. “ After I disabled RDM in the Enttec ODE setup configuration everything worked flawlessly.
Recommended Products
$37.95
$ 16 .99 $16.99