DETAILS:
For a more durable Extreme Chassis Black finish on bare metal, start with this Extreme Chassis Black Primer.
- Maximizes adhesion
- Improves chip resistance
- 14-oz. aerosol covers 8 sq. ft.; 1-qt. can covers 30 sq. ft.
- 2%-10% Gloss Level
Epoxy-fortified primer is the perfect foundation formulated specifically for Extreme Chassis Black and Original Chassis Black.
Quart 1. Clean all surfaces thoroughly to ensure surface isfree from all grease, oil, and any polysilicons. Eastwood PRE (#10041Z aerosol or #10194ZP quart) is recommended. Make sure that surface is free from rust. For best results use when can and surface are between 70° and 90° F(21° and 32° C), 50% or less humidity. 2. If making spot repairs, feather-edge by sanding original finish. Do not use Extreme Chassis Black Primer over new enamel. 3. Stir for at least 1 minute. Use in a well ventilated area. 4. Contents are thinned to sprayable consistency. If desired further thin with Toulol or Xylol. For Spray-on Application: Apply two thin coats allowing 2 to 4 hours between coats. Opaque black color indicates full coverage has been achieved. 5. Extreme Chassis Black Primer can be top coated with Eastwood Original or Extreme Chassis Black after 2 to 4 hours. 6. Finished article should be allowed to dry 48-72 hours before being handled.
ACCESSORIES
Eastwood PRE Painting Prep Paint Mixing Cups 1QT Devilbiss Prep Wipes Painting Tack Rags Devilbiss Dekups 24oz Painters Masking Tape Painters Masking Paper Eastwood Air Injected Cleaner Eastwood Scuff Pads Razor Blades
