Your cart is empty.
Your cart is empty.ChromaBlue For use with plastisol inks, is ideally suited for textile printers using direct emulsions who are seeking faster screen turnaround without sacrificing image quality Color: Blue Solids: 50% (more of the good stuff) Viscosity: Medium Fast Drying (since there's less water) Superior Mesh Bridging Excellent Reclaimability SAFETY ChromaBlue emulsion should be handled like any other direct emulsion. This material is not hazardous when used within reasonable standards of industrial hygiene and safe working practices. Refer to MSDS. User Instructions ChromaBlue is a one part emulsion that does not require a diazo to be added. Use straight from container. It is important to have a clean dry screen before you apply the emulsion. Use a clean coating trough that has a smooth edge without nicks or burrs. Coating environment should be in a clean safe light area. 1. Apply one or two coats of emulsion to the print side. 2. Reverse the screen and apply one or two coats to the squeegee side. To achieve user specific results, additional coats may be used. STORAGE Shelf life is 24 months when stored at room temperature. ChromaBlue should not be stored at temperatures above 80°F (27°C). 1 Gallon Container
Brett Shuemaker
Reviewed in the United States on September 14, 2024
ChromaBlue is the best emulsion I've found so far. Long shelf life, coats easily, more tolerant of exposure to any potential UV light, exposes very quickly (approx 25 sec with my setup), holds sharp edges and cleans very easily.
Jessie
Reviewed in the United States on June 28, 2020
I been using Chromablue for over 2 yrs. now why 4 stars. Main reason is because while it works great with 236 screens and up for me. I have issues at lower mech count. I dont get a full even coat when dry. Is like part of the emulsion didnt go thru the screen. I didnt have this issue with dual cure emulsion.
Recommended Products
