Your cart is empty.
Your cart is empty.Blue-Job Chrome Polish uses a unique non-abrasive, highly concentrated, powder formula. Just dampen the microfiber applicator and dip it in the powder. A thin paste cleans and polishes. A thicker paste removes bluing and tougher discoloration. It will not scratch the chrome or stainless steel. DIRECTIONS: 1. Lightly dampen applicator cloth, dab into powder. 2. MAKE A THICK PASTE on rusty or discolored chrome. 3. Polish chrome surface, one small area at a time. Finish with dry cloth. To finish chrome or remove fingerprints a thinner consistency may be used. This product is specially formulated for chrome and stainless steel only. Do not use this product on aluminum, billet aluminum, chrome plated aluminum, other metals, plastic coatings, powder coatings, or painted surfaces. Test small inconspicuous area before use.
MARCO NAVARRETE
Reviewed in Canada on September 6, 2024
Well packaged, fast service and very good product!
SARAH W
Reviewed in the United States on May 7, 2024
Used on a set of Vance&Hines pipes that came off a bike that was running lean. VERY BLUE. This and a little elbow grease, ended up using a buffer to apply it, made them look like new! Highly satisfied! Container is little though.
Louis K.
Reviewed in the United States on May 25, 2024
It took some of the bluing off my motorcycle pipes, but not as much as I had hoped. Chrome was in good condition, so I'm a bit disappointed. May try it with a small buffer and see if that works any better.
Sarah
Reviewed in the United States on December 12, 2024
I was very skeptical that it would help my exhaust pipes. I followed the directions that I found on YouTube and it is amazing how well it works. To those people that are having trouble with this product, I would suggests that you need to make a thick paste with just a little water for it to work. I mixed it too thin and it did nothing.
Big Poppa
Reviewed in the United States on October 20, 2024
Didnt do what they claim. Tried this product on 3 different chromed surfaces with bluing, didnt work on any of them. It did polish up clean white chrome nicely, but so can a dozen other cheaper products. Never again.
Andrew Banh
Reviewed in the United States on July 27, 2023
Purchased this after finding some old youtube clips of this product.I used this on a 10 year old stainless steel exhaust. The exhaust came with blue burnt exhaust tips which have always been an eye sore for me.Just use the supplied strip of cloth with a little water and began working it into the work area. Took about 1 hour in total for the pair of tips are around 4" in diameter.Product seem to work best with less water and more of paste like consistency. It does take a bit of work to get the desired results but the product does work. Buy with confidence.
K. F.
Reviewed in the United States on November 12, 2023
I was a bit leery purchasing the product. It's meh (okay) It did reduce the bluing on my exhaust but was far from a home run.
Jeremy D. Pavleck
Reviewed in the United States on April 25, 2023
After trying a bunch of other products to shine up my exhaust I finally bit the bullet and spent what I feel is way too much money for a tiny tin of powder - but I'll do it again and again.This stuff really works! It works faster, and more thoroughly, and has a richer shine than anything else I tried.However, it can't work miracles. If your exhaust has gone beyond a slight bluing to that really dark blue/blackish color then it won't do a thing for you - no matter how much you use, how hard you rub, or how much you threaten the tin. So keep that in mind.
chris
Reviewed in the United Kingdom on July 19, 2021
It was suggested that this product brings back the shine of dull chrome on vintage sewing machines.Very pleased with the results.can recommend for any dull chrome.😊
R. Schultz
Reviewed in the United States on June 18, 2021
It works great, but you need to be ready to spend some time on it to get good results. Don't expect to dab some of this powder on a wet rag, rub for five minutes and the pipes are magically cleaned. Not going to happen! Sure, you can do it by hand if you want to spend all afternoon at it and wear out your fingers at the same time. Use some type of powered cloth buffer and you will accomplish the job in minutes not hours. I spent about 45 minutes on each header pipe to get the results I wanted. As you can see one picture, I used a cloth buffing wheel attachment on my hand drill. Other than a powered buffer, the trick to using this powder is getting the right thickness of the paste that you mix. Start with a really thick paste that does not run at all, is still kind of grainy, and stays where you put it on the pipe. You can work that onto the pipe by hand with a finger wrapped with a wet rag if you want. Then change over to the powered buffer and work that thick paste into the pipe. Your cloth buffer needs to be damp also, not dry, or it won't hold the paste. If your paste is too thick and not spreading easily as you buff, add just a little tiny bit more water so it flows about like toothpaste. My right side header pipe was so blue it was almost black in spots. (Previous owner ran it with carbs so plugged up it was running way to lean.) This is a 1983 Honda GL650 Silver Wing that I'm restoring, so age has nothing to do with it. If you take your time and do the necessary work, it WILL do the job.
Client d'
Reviewed in France on July 29, 2019
Un défaut de carbut avait bleui tout le terminal. Il faut de la patience mais c'est un résultat très satisfaisant.
Rudy Fransen
Reviewed in Germany on October 11, 2019
hab mein altes rohr zum glänzen bekommen, hat zwar den ganzen Tag gedauert, aber blaue verfärbungen sind weck....aber die ziehmlich dunklen stellen die am krümmer sind gingen nicht weck,
Pedro AB
Reviewed in Spain on May 23, 2016
Probé con varios productos para tratar de quitar las quemaduras del tubo de escape de mi moto, y no hicieron nada. Blue Job ha funcionado a la perfección. Ha sido impresionante ver como frotando un poco el producto se iba quitando las quemaduras poco a poco. Hay que estar un buen rato frotando, pero al final se ha eliminado el problema. Recomiendo ver algun tutorial de como utilizarlo en youtube, ya que la etiqueta viene en ingles. Lo recomiendo.
Recommended Products
