Your cart is empty.
Your cart is empty. Get high performance at an affordable price with a BDS NX2 Steering Stabilizer Shock featuring NX2 Nitro Series shocks compatible with Dodge Ram 2500 / 3500 4WD 2009-2023. They use a pressurized nitrogen-charged twin-tube design with 10-stage velocity-sensitive valving for lightning-fast dampening adaptive to whatever terrain you traverse on- or off-road. The 2-inch bodied shocks use a large 1-3/8-inch fluon-banded piston, self-lubricating seals and a 14mm hardened chrome shaft to help resist rock chips and corrosion. Polyurethane bushings and metal sleeves are included to make swapping over your shocks a breeze.
Note: Mounting Bracket Kits Sold Separate
IMPORTANT: Vehicles with radius arm mounted ride height sensors will require BDS123303. The OEM recommends the replacement of the pitman arm nut after each time it has been removed. Use a small pitman arm puller to remove the drag link joint and steering stabilizer taper. If your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS123402. Due to the taller factory ride height, Tremor models will not net full advertised lift height. Final ride height will be the same as standard models. Larger tires on stock wheel are not recommended due to interference with brake line, radius arm and sway bar. Use recommended specs listed in wheel and tire fitment section. Minor trimming may be necessary for clearance of 37x12.50 tires on certain wheel setups. Installation requires a torque wrench capable of 406 ft-lbs. Trucks without top mounted overload springs will require (4) UBT4028. Vehicles with leaf spring ride height sensors must select the rear block option.
