Your cart is empty.
Your cart is empty.For routing solid wood serving trays, Flat dishes, shallow bowls, and similar objects, use This 3-in-1 specialty plunging bit. It cuts Flat, smooth bottom surfaces, vertical walls, and a transition radius between them, all in one pass. It can be used in handheld, table-mounted and CNC routers, #45981, diameter (D), 1/2, radius (r), 1/8, cutting Height (B), 1/2, shank (D), 1/4, overall length (L), 2-1/8, flutes, 2, Carbide Tipped bowl & Tray 1/8 radius x 1/2 dia x 1/2 x 1/4 inch Shank
Robb
Reviewed in the United States on February 15, 2025
I use this bit for my CNC projects - those that require a lot of material removal. A must if you are making trays, cutting a channel on a butcher block, etc. I've used it over 12 hours and don't see any indication that it is dulling. It is perfectly balanced so vibration is not an issue. Highly Recommend.
csmith
Reviewed in the United States on January 3, 2025
Work well in hardwood/softwood bowls and trays
ian cockrell
Reviewed in the United States on January 29, 2025
8 hours of cutting time so far, and no sign of wear. Tool is very sharp and produces nice curly chips without much heat.The tool was very dimensionally accurate unlike cheaper bits I have tried! I machine roundovers programmed directly over this tool's radius and there is no misalignment between the two. Worth every penny!
Jayson
Reviewed in the United States on August 25, 2024
Great product awesome
3D Printer
Reviewed in France on July 21, 2024
Utilisé avec une CNC. Rendu propre. À vérifier avec le temps.
Richard Goode
Reviewed in the United States on March 6, 2024
I needed to upgrade from my CNC-provided bits and I decided to "treat myself" to some Amana bits to see how they performed.So far this bit has worked well. Results are nice and clean, and the resulting product could technically be finished without any additional sanding. I personally do sand further, but this bit is certainly doing a nice job at producing tidy results.A bit pricey, especially if you need to keep a few in stock as spares.
allison d
Reviewed in Canada on February 8, 2024
This bit is amazing, cut olive wood very clean!
Jeff
Reviewed in the United States on December 14, 2024
Functions great, smooth cut, stayed sharp after over 12 hours of continuous cutting over three days. Very durable and can't beat the price.
Shane
Reviewed in the United States on November 23, 2024
The bit, (3/4"x5/8"x1/4) worked as expected in my Makita router powered hobby CNC. Typical Amana tool quality from my limited experience with their products but the packaging in a flimsy little plastic pouch is a miss. I'm not entirely sure if one of the carbide blade was damaged in transit. Good bit otherwise.
Customer
Reviewed in the United States on August 16, 2023
I probably need to replace my bit, I’ve been running it making Lazy Susan's and even my valet tray and it’s been carving very clean with very little tool markings. However, I set my step-over at 30% which takes a little longer, but I very little sanding when it’s done. I will buy this bit again.
ESS
Reviewed in Canada on December 12, 2023
Great quality and best price available. Highly recommend.
ESS
Reviewed in Canada on December 12, 2023
Best price and great quality. Highly recommend.
Customer
Reviewed in Canada on November 22, 2023
Did exactly what I wanted it to do. Nice and sharp. I’d buy their bits again for sure, even if the price is a bit higher.
Recommended Products
$14.95
$ 7 .99 $7.99
$13.95
$ 7 .99 $7.99