Shopping Cart

Your cart is empty.

Your cart is empty.

2Pcs 5V Type-C Timer Relay DC 6-30V Programmable Cycle Delay Timer Switch Module with Digital LED Display

4.4 (8) Write Review
Free shipping on orders over $29.99

$9.99

$ 4 .99 $4.99

In Stock

1.Style:Type C


About this item

  • 【Product Parameters】Operating voltage: DC 6V-30V, support Type-C 5V power supply; trigger source: high level (3V-24V), with optocoupler isolation; output power: 30V/5A DC,220V/5A AC; quiescent current: 20mA; operating current: 50mA; operating temperature: -40℃-85℃(-40℉-185℉).
  • 【Timing Range】The time delay relay supports 0.1 seconds (min) - 999 minutes (max) continuously adjustable. The timing range is selected by short pressing the STOP button after setting the parameter values in the mode selection interface.
  • 【Enable Mode】 ON: the delay relay is allowed to be on during the OP conduction time; OFF: the delay relay is forbidden to be on and is off; short press the STOP button in the main interface to switch between ON and OFF, the current state will flash and then return to the main interface.
  • 【Sleep Mode】 When the digital LED cycling relay is enabled,digital tube of the relay board will automatically turn off if there is no operation for 5 minutes. It can be woken up by pressing any of the buttons.
  • 【Application Scenario】DC 6-30V programmable delay relay is widely used in electronic security systems, industrial automation equipment, intelligent irrigation systems and home automation systems, etc.


Product Description

Product Indication Diagram

GXMA0087-004
GXMA0087-004

Product Specifications:

  1. Operating Voltage: The product can function with a voltage range of 6-30V. Additionally, it can be powered using a micro USB supply at 5.0V.
  2. Trigger Signal Source: It accepts a high-level trigger from 3.0V to 24V. The separation of signal ground and system ground enhances the system's immunity to interference. Users have the option to connect the grounds if desired.
  3. Output Capability: The module can effectively control devices with a voltage up to 30V and current up to 5A, both in direct current (DC) and alternating current (AC) configurations.
  4. Current Consumption: The static current is 20mA, and during operation, it draws a current of 50mA.
  5. Service Life and Temperature Range: The product is designed for durability, with a service life exceeding 100,000 cycles. It can operate reliably within a temperature range of -40°C to 85°C.
GXMA0087-004

Operating Modes:

P1: Upon receiving a triggering signal, the relay turns on for an OP time and then turns off. Within the OP time, the following operations apply:

  • P1.1: Subsequent triggering signals during the OP time have no effect.
  • P1.2: Subsequent triggering signals during the OP time reset the timer.
  • P1.3: Subsequent triggering signals during the OP time reset the timer, causing the relay to turn off and stop the timing process.

P2: When a triggering signal is received, the relay turns off after a CL time, then turns on for an OP time. Once the timer completes, the relay turns off.

P3.1: Upon receiving a triggering signal, the relay turns on for an OP time, then turns off for a CL time. This cycle repeats, and within each cycle, if another signal is received, the relay turns off and stops the timer. The cycle count (LOP) can be configured.

P3.2: After power-up, without requiring a triggering signal, the relay turns on for an OP time and then turns off for a CL time. This cycle repeats, and the cycle count (LOP) can be configured.

P4: Signal Holding Function - If a triggering signal is present, the timer resets to zero, and the relay remains on. Once the signal disappears, the relay turns off after an OP time. If another signal is received during the timing period, the timer resets to zero.

These operating modes delineate the various functionalities and responses of the module to different triggering signals, offering flexible options for relay control and timing operations.

How to Configure Parameters

  1. Begin by determining the relay's operating mode.
  2. Based on the relay's operating mode, on the main interface (when the module powers on, the current working mode will flash – default is P1.1 mode), proceed to the main interface after which, "Press and hold the SET button for 2 seconds, then release" to access the mode selection screen. Use the UP and DOWN buttons for short presses to select the desired mode to be configured (P1.1~P-4).
  3. Once the desired mode is selected (e.g., P3.2), press the SET button briefly to set the corresponding parameters. The parameters to be set will flash (OP on-time, CL off-time, LOP cycle count ("---" indicates unlimited cycles)). Use UP and DOWN to adjust the parameter values, supporting both long presses (rapid increase or decrease) and short presses (increase or decrease by 1 unit). Once the parameter values are set, press the STOP button briefly to select the decimal point position and choose the timing range (corresponding time from 0.1 seconds to 999 minutes). Press the SET button briefly to set the next parameter for the current mode – the process is the same as before.
  4. After configuring the parameters for the selected mode, press and hold the SET button for 2 seconds, then release. The currently configured mode will flash, and you will return to the main interface, confirming successful parameter setup.

Main Interface: In a non-operational state, the relay displays "000" (without a decimal point). In operational states, the relay displays with a decimal point.

Mode Selection Screen: Accessed by pressing and holding the SET button, exit by pressing and holding SET again, returning to the main interface.

Application Scenarios

GXMA0087-004

Deana G.
Reviewed in the United States on April 7, 2025
This module performed exactly as required for my project. I needed a specific delay time of 0.7 seconds before a strobe was triggered for a Halloween prop. The ability to select an operating mode that started in the "Normally Closed" state was critical, and this device provided that. A quick search of YouTube for "JZ 801 Programmable Relay Module" will give you a great overview of the module and a guide on how to program it.
Jose G. Ramos
Reviewed in the United States on August 9, 2024
This is a great and powerful device for automation but lacks proper documentation. Highly programmable and customizable
Kindle Customer
Reviewed in the United States on July 30, 2024
Applied 24 VDC as directed. Smoked immediately. Returned. 中国制造。 中国品质。
Eric S.
Reviewed in the United States on March 11, 2024
This is very handy timer when you need a programmable timer for all your applications. Used it for my several applications and it delivered. Highly recommended.
Customer
Reviewed in the United States on October 29, 2024
works very
James
Reviewed in the United States on October 11, 2024
Unsettable timer, no vendor support, it’s going back.
Phillip K Coffee
Reviewed in the United States on January 16, 2024
This delay timer worked well for my project. Their is no direction on the listing but was easy able to find the direction online and from other listings. I am happy with it.
RBus
Reviewed in the United States on December 22, 2023
The timer seems to be of good quality. The instructions are lacking for setting the time. There is no link in the original desription for contacting the supplier or area for asking questions. That's on Amazon for not supporting their vendors or customers. I will be returning this item and looking for something with support. It does me no good if I can't set the time. IT IS A TIMER!