Your cart is empty.
Your cart is empty.
Silver or Black Motor Send Random
It features an alloy block frame that houses two rollers on stainless steel real ball bearing instead of oil-impregnated bronze bushings. The drive shaft and all axles are integral to the roller, which makes it possible to drive the mill clockwise or counter-clockwise.
① As a consistent, precise crush is also vital for making the best beer possible, the roller is the most important part in the consistent crush. The DY368 roller is using food grade stainless steel, which has molybdenum added to its alloy content during production. Molybdenum provides an very high degree of corrosion resistance. This is an advantage for objects that require resistance to extreme environmental conditions such as salt water, de-icing salts, brine solutions, or other chemical forms of chemical exposure. It is durable, easy-to-fabricate, clean, weld and finish.
② We are using real bearing for the roller instead of brass bushings. Real ball bearings not only make the lifetime of the mill longer also make the whole grinding process more efficient.
Using Guide:
① Clean it with water before using.
② No need to coat vegetable oil on the surface of rollers during production process.
Specifications
Type: Electric grain grinder
Materials: Stainless steel roller, 6061 Aluminum for the mill body and hopper
Voltage: 110V(US PLUG)
Power: 60W
Speed: 75RPM
Roller: 6"x1.5"diameter (15x3.8cm diamter)
Output rate: 20kg/hour (0.3kg/min)
Hopper capacity: 4L
Packing size: 51*25*22cm
G.W.: 9kg
Package Content
1 X Malt Mill
4 X Hoppers
1 X Gear Motor
2 X Rollers
Jon
Reviewed in the United States on July 25, 2021
Great idea just cheap screws holding it together. Shipping was fast but some plate screws were loose and in the box. After putting it together it ran ok. It's not strong enough for corn so you have to mill it twice. After an hour of use the adjustment screws stripped. I had to make a run to the hardware store to get larger screws and retap it together. You must be mechanically inclined or don't bother buying in. This product needs some improvements. The holding tray screws keep backing out. I recommend using some lock washers or locktite before you end up grinding your bolt nuts and ruining your grinder. Good luck.
Recommended Products
